Materials : 304, 302, 304L, 316, 316L stainless steel wire, or galvanized steel
wire.O.D : 1 inch, 3inch, 4inch, 6inch, 8inch, 10inch, 12inch.
the slot : 0.1mm-45mmthe wire :2.0mm*30.mm, 3.0mm*4.6mm, 3.0mm*5.0mmthe rods:3.8mm/22, 3.8mm/32, 3.8mm/48, 3.8mm/50
The rod can be round wire, triangular wire or trapezoid wire.
The warp is triangular wire (V-shaped wire).
Styles of connection: by welding or by threaded male/female coupling.
Standard length: 1m-5.85m
1.Each slot opening of sand control screen between adjacent wires is V-shaped, resulting from the special shape of the wire used to form the screen surface.
2.The V-shaped opens, designed to be nonclogging, are narrowest at the outer face and widen inwardly.
3.Continuous-slot Johnson deep well screens provide more intake area per unit area of screen surface than any other type.
4.For any given slot size, this type of screen has maximum open area.
Technical Parameters for sand control screen
1.We can produce wedge wire screen,wedge wire filter, filter pipe.
2.Material:stainless steel 304,316,316l,320,Hastelloy CWire diameter: 1.5X2mm, 2x3mm, 3x6mmLength: MAX 6 meters.Diameter:MAX 280mmSlot size: 0.10, 0.15, 0.20, 0.25, 0.30,....., 3.00 also achieved upon request.
Slot Width Tolerance for sand control screen
Slot width shouldn't exceed 0.02mm and shouldn't less than 0.01mm compare to standard size when slot width is below 0.2mmSlot width should be controlled within ± 0.02mm compare to standard size if slat width is bigger than 0.25mmPlatingHard plating the wedge bar surface, plating thickness is 0.20-0.30mm. surface hardness >HRC : 60-66 (HV700-900)Product structure : wedge wire screen and stainless steel pipe